APX 6500 O5 CH
41
NEXT > < PREV CONTENTS
Emergency Operation
Special Considerations for Emergencies
ADVANCED FEATURES
• If you press the emergency button while in a channel that
has no emergency capability, a low-pitched tone sounds.
• If the unit is out of the range of the system and/or the
emergency alarm is not acknowledged, a tone sounds and
the display shows NO ACKNOWLEDGE.
• If you press the emergency button, then change to a mode
that has no emergency capability, the display shows NO
EMERGENCY and a continuous low-pitched tone sounds
until a valid emergency mode is selected or until the
emergency is cancelled.
• When an emergency is active, changing to another mode
where emergency is enabled (trunked or conventional)
causes an emergency alarm and/or emergency call to be
active on the new mode.
Emergency (Orange) Button*
To Next Page
Loading...
