APX 6500 O5 CH
47
NEXT > < PREV CONTENTS
Voice Announcement
ADVANCED FEATURES
This feature enables the radio to audibly indicate the current
feature mode, Zone or Channel the user has just assigned.
This audio indicator can be customized per customer
requirements.
This is typically useful when the user is in a difficult condition
to read the content shown on the display.
Each voice announcement is within a limit of three seconds
maximum. The sum total duration for all voice
announcements in a radio shall be no more than 1000
seconds.
Note: This feature must be preprogrammed by a qualified
radio technician.
The features which Voice Announcement supports are:
• Zone
• Channel
• Scan
• PL Disabled
• Talkaround/Direct
• Tx Inhibit
Note: Voice announcements support certain number of zone-
channel, but not all.
Seek advice from your dealer or qualified technician for
the best selection of this feature.
The two options of priority for the Voice Announcement
available are:
• High – enables the voice of the feature to announce even
when the radio is receiving calls.
• Low – disables the voice of the feature from announcing
when the radio is receiving calls.
To Next Page
Loading...
