APX 6500 O5 CH
50
NEXT > < PREV CONTENTS
Controlling the Display Backlight
UTILITIES
You can enable or disable the radio’s display backlight as
needed, if poor light conditions make the display difficult to
read.
Depending on how your radio is preprogrammed, you can
also maintain a minimum backlight level on the radio’s
display.
Procedure:
1 Press the Dimmer button to adjust the brightness of the
display.
OR
Press any key of the keypad, the Menu Select or Menu
Navigation buttons, or any programmable radio controls or
buttons to turn the backlight on.
ZONE CHAN STS CALL RPGM
ZONE A
CHAN 1
Emergency
(Orange)
Button*
Menu Select Buttons*
4-Way Navigation Buttons
Dimmer
Button
Volume Knob
Power Button
Home
Button*
Mode Knob*
LED Indicators
Accessory Port (Microphone)
To Next Page
Loading...
