Your radio also supports a maximum of 50 call lists. Each list can store up to 100 IDs.
NOTE: Your radio is programmed with a few contacts per Call Lists. Check with your dealer or
system administrator for more information.
7.4.1
Making a Private Call from Contacts
Prerequisites: Your radio must be preprogrammed to allow you to use this feature.
Procedure:
1
or to Cnts and press the Menu Select button directly below Cnts.
The entries are alphabetically sorted.
2 or to the required subscriber alias.
3 Perform one of the following actions:
• Press the Menu Select button directly below Optn and proceed to the next step.
• or to scroll through the available IDs for the selected subscriber alias and proceed to step
6.
4 or to Call and press the Menu Select button directly below Sel.
5 or to select the call type.
6 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
7 Press the PTT button to initiate the call.
During the call, the display shows the subscriber alias.
8 Press and hold the PTT button to talk. Release the PTT button to listen.
The LED lights up solid red when the PTT button is pressed.
If there is no voice activity for a preprogrammed period, the call ends.
If the call reaches the maximum ring time, the call ends.
7.4.2
Adding a New Contact Entry
Procedure:
1
or to Cnts and press the Menu Select button directly below Cnts .
The entries are alphabetically sorted.
2 or to [New Contact] and press the Menu Select button directly below Sel .
3 or to Name and press the Menu Select button directly below Edit.
The display shows Edit name and a blinking cursor appears.
4 Use the keypad to enter the name and press the Menu Select button directly below Ok once
you have entered the name.
To cancel this operation, press the Menu Select button directly below Cncl to return to the
previous screen.
MN001425A01-AW
Chapter 7 : Advanced Features
59
To Next Page
Loading...
