Motorola APX4000 XH - Page 116

3
or to Unlock Pswd.
4
Press the Menu Select button directly below Sel.
5 Enter the old password.
6
Press the Menu Select button directly below Ok.
7 Enter the new password.
8
Press the Menu Select button directly below Sel.
9 Re-enter the new password.
10
Press the Menu Select button directly below Sel.
The password is updated.
If the two passwords do not match, repeat Steps 5
through 10.
Note
If you enter three incorrect old passwords, the
radio exits the password feature. You cannot
access this feature again until you turn the
radio off and on.
Changing Your Tactical Inhibit Password
1
or to Pswd.
2 Press the Menu Select button directly below
Pswd.
The display shows Change Password screen.
3
or to Tactical Inh Encode Pswd.
4
Press the Menu Select button directly below Sel.
5 Enter the old password.
6
Press the Menu Select button directly below Ok.
7 Enter the new password.
8
Press the Menu Select button directly below Sel.
9 Re-enter the new password.
10
Press the Menu Select button directly below Sel.
The password is updated.
If the two passwords do not match, repeat Steps 5
through 10.
Advanced Features
112
English