Motorola APX4000 XH - Editing the Coordinates of a Waypoint

1 Press the Menu Select button directly below
Optn.
2
or to Waypoints and press the Menu
Select button directly below Sel.
The display shows a list of waypoints.
3 or to the required saved waypoint, and
press the Menu Select button directly below Optn.
4
or to Edit name and press the Menu
Select button directly below Sel.
A blinking cursor appears in the Edit Name
screen.
5 Use the keypad to edit the alias.
6 Perform one of the following actions:
• Press the Menu Select button directly below
Ok once you are done.
• Press the Menu Select button directly below
Cncl to return to the Waypoints main screen.
7
The display shows <Waypoint name> Updated
and the radio returns to the Waypoints main
screen.
8 Perform one of the following actions:
• Press the Menu Select button directly below
Back to return to the previous screen.
•
Press , the PTT button, or the
preprogrammed GPS button to return to the
Home screen.
Editing the Coordinates of a Waypoint
Note
Only the preprogrammed coordinates of Home
and Destination can be edited by the user.
Ensure your radio shows the current location on the
screen.
1 Press the Menu Select button directly below
Optn.
2
or to Waypoints and press the Menu
Select button directly below Sel.
The display shows a list of waypoints.
3 Perform one of the following actions:
•
or to [Home] and press the Menu
Select button directly below Optn.
Advanced Features
118
English