The main display shows the icon of the secondary
feature.The main display does not show the icon of
primary feature.
Your radio by default is set to use the primary feature.
Short press the MFK to toggle it to work on either the
secondary or primary feature.
The concentric ring LED on the MFK will blink in
green when the knob is set to secondary feature.
The secondary feature has an inactivity timer. This
timer starts when the secondary feature is idle. The
radio returns to primary feature when the timer
expires.
If the MFK is set to operate only one feature, it is
recommended that it be set to Volume Change.
Consult your dealer or system administrator for the
best options available for MFK.
Keypad
You can use the 3 x 4 alphanumeric keypad on the
keypad microphone to access your radio’s features.
The keypad functions in a manner similar to a
standard telephone keypad when entering numeric
digits. When the keypad is used to edit a list, each
key can generate different characters of the alphabet.
The following tables show the number of times a key
needs to be pressed to generate the required
character.
Identifying Radio Controls
31
English