• Use the MFK to select the channel with the
desired talkgroup.
2 Hold the microphone vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
3 Press the PTT button to make the call.
The radio shows different indicators based on the
system the radio is configured.
• For ASTRO Conventional system, the LED
lights up solid red. The display shows the
talkgroup alias or ID.
• For Trunking system, the LED lights up solid
red.
4 Speak clearly into the microphone.
5 Release the PTT button to listen.
Making a Private Call (Trunking Only)
Your radio must be preprogrammed to allow you to
use this feature.
This feature allows you to send an individual Call
Alert or page if there is no answer from the target
radio. See Sending a Call Alert Page on page 81 for
more information.
1 Perform one of the following actions:
• To access this feature via a preprogrammed
button, press the preprogrammed Quick
Access (One-Touch) Private Call button to
dial the preprogrammed ID (number) and
initiate the Private Call. Proceed to step 5.
• To access this feature via the menu, proceed
to the next step.
2
or to Call, and press the Menu Select button
directly below Call.
The display shows the last transmitted or received
ID.
3 To select the required ID, perform one of the
following actions:
• Press the Menu Select button directly below
Cnts to scroll through and select the required
ID.
• Press the Menu Select button directly below
List to go to the first number of the call list.
•
or to the required ID.
• Use the keypad to enter the required ID.
4 Press the PTT button to initiate the Private Call.
57
English
To Next Page
Loading...
Need help?
General
