1
Introduction
1
General This manual covers information needed for level one troubleshooting. Level
one troubleshooting consists of radio programming, radio alignment, knobs
replacement, and installation and removal of antenna, belt clip, battery, and
universal connector cover. This will be the only level of service allowed for the
service centers, self-maintained customers, and distributors for the first six
months of the life of this product.
Included in this manual are radio specifications for the 800MHz frequency
band, a general description of XTS 3000 models, recommended test
equipment, service aids, radio alignment procedures, general maintenance
recommendations, and procedures for basic assembly and disassembly.
Notations Used
in This Manual
Throughout the text in this publication, you will notice the use of warnings,
cautions, and notes. These notations are used to emphasize that safety hazards
exist, and care must be taken and observed.
NOTE: An operational procedure, practice, or
condition, etc., which is essential to
emphasize.
CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in
equipment damage.
!
C a u t i o n
WARNING indicates a potentially hazardous
situation which, if not avoided, could result
in death or injury.
!
W A R N I N G
!
DANGER indicates an imminently
hazardous situation which, if not
avoided, will
result in death or injury.
D A N G E R
!
To Next Page
Loading...
