14
Figure 2 RSS Service Menu Layout
All SERVICE screens read and program the radio codeplug directly; you do
NOT have to use the RSS GET/SAVE functions to use the SERVICE menus.
The SERVICE screens introduce the concept of the “softpot,” an analog
SOFTware-controlled POTentiometer used for adjusting all transceiver
alignment controls.
Each SERVICE screen provides the capability to increase or decrease the
‘softpot’ value with the keyboard UP/DOWN arrow keys respectively. A
graphical scale is displayed indicating the minimum, maximum, and
proposed value of the softpot, as shown in Figure 3.
Figure 3 Softpot Concept
REFERENCE OSCILLATOR ALIGNMENT
TRANSMIT POWER ALIGNMENT
TRANSMITTER ALIGNMENT MENU
TRANSMIT DEVIATION BALANCE
(COMPENSATION) ALIGNMENT
TRANSMIT DEVIATION LIMIT ALIGNMENT
F2 -
F2 -
F3 -
F4 -
F5 -
RECEIVER ALIGNMENT MENU
F3 -
FRONT END BANDPASS FILTER ALIGNMENTF2 -
SERVICE
HELPF1 -
EXIT, RETURN TO SERVICE MENUF10 -
B
A
B
C
D
E
C
B
J
Do NOT switch radios in the middle of any SERVICE
procedure. Always use the EXIT key to return to the
MAIN menu screen before disconnecting the radio.
Improper exits from the SERVICE screens may leave
the radio in an improperly configured state and
result in seriously degraded radio or system
performance.
!
C a u t i o n
Min.
Value
Max.
Value
0
15
To Next Page
Loading...
