Motorola ASTRO DIGITAL XTS 3000 series - Page 19

9
Control Top
and Keypad
Test Mode
To check the display, buttons, and switches, perform the following tests:
1. Turn the radio on and adjust the volume for a comfortable listening level.
The volume level remains constant once in the test mode.
2. Within 10 seconds after the “
Self Test
” is complete, press Side Button 3
five times in succession.
3. After “
RF TEST
” appears on the display, press Side Button 1 once, “
CH
TEST
” appears on the display.
4. Next, press and hold the Top Programmable Button; all segments on the
display will light, and the LED on the control top will illuminate a red
color.
5. Release the Top Programmable Button; “
3/0
” appears, which indicates
that the Top Programmable Button is in the open condition.
6. Press the Top Programmable Button again; “
3/1
” appears, which
indicates that the Top Programmable Button is in the closed condition.
7. Rotate the Mode/Zone Selector Switch; “
4/0
” through “
4/15
” appears,
which indicates that the selector switch is in mode/zone position 1
through 15.
8. Rotate the Two-Position (A/B) Switch; “
65/0
” and “
65/1
” appear.
9. Rotate the Three-Position Programmable Switch; “
67/0
,”
“
67/1
,” and “
67/2
” appear.
10.Rotate the Volume Control; “
2/0
” through “
2/255
” appear.
11.Press Side Button 1; “
96/1
” appears; release, “
96/0
” appears.
12.Press Side Button 2; “
97/1
”appears; release, “
97/0
” appears.
13.Press Side Button 3; “
98/1
”appears; release, “
98/0
” appears.
14.Press the PTT Switch; “
1/1
” appears; release, “
1/0
” appears.
15.Keypad Checks:
- Press 0, “
48/1
” appears; release, “
48/0
” appears.
- Press 1, “
49/1
” appears; release, “
49/0
” appears.
- Press 2, “
50/1
” appears; release, “
50/0
” appears.
- Press 3, “
51/1
” appears; release, “
51/0
” appears.
- Press 4, “
52/1
” appears; release, “
52/0
” appears.
- Press 5, “
53/1
” appears; release, “
53/0
” appears.
- Press 6, “
54/1
” appears; release, “
54/0
” appears.
- Press 7, “
55/1
” appears; release, “
55/0
” appears.
- Press 8, “
56/1
” appears; release, “
56/0
” appears.
- Press 9, “
57/1
” appears; release, “
57/0
” appears.
- Press *, “
58/1
” appears; release, “
58/0
” appears.
- Press #, “
59/1
” appears; release, “
59/0
” appears.
- Press <, “
128/1
” appears; release, “
128/0
” appears.
- Press O, “
129/1
” appears; release, “
129/0
” appears.
- Press >, “
130/1
” appears; release, “
130/0
” appears.