Notice
Installation Requirements for
Compliance with
Radio Frequency (RF) Energy
Exposure Safety Standards
CAUTION: This radio is intended for use in occupational/controlled conditions, where users
have full knowledge of their exposure and can exercise control over their exposure to meet
FCC limits. This radio device is NOT authorized for general population, consumer, or any other
use.
To ensure compliance to RF Energy Safety Standards:
• Install only Motorola Solutions approved antennas and accessories.
• Be sure that antenna installation is per Antenna Installation on page 65 of this manual.
• Be sure that the Product Safety and RF Safety Booklet enclosed with this radio is available to the
end user upon completion of the installation of this radio.
Before using this product, read the guide enclosed with your radio which contains important operating
instructions for safe usage and RF energy awareness and control for compliance with applicable
standards and regulations.
For a list of Motorola Solutions-approved antennas and other accessories, visit http://
www.motorolasolutions.com.
WARNING: This equipment is compliant with Class A of EN55032. In a residential environment,
this equipment may cause radio interference.
MN005720A01-AB
Installation Requirements for Compliance with
Radio Frequency (RF) Energy Exposure Safety Standards
19
To Next Page
Loading...
