•
To
reconnect
with a device, turn on the
device or touch the device name in the
Bluetooth devices
list.
•
To
disconnect
a device, turn off the
device, or touch the device name in the
devices list and touch Menu >
Disconnect
.
•
To
turn off
Bluetooth power: Touch
Menu >
Settings
>
Wireless &
networks
>
Bluetooth
.
Wi-Fi Networks
To connect a network in your range:
1.
Touch Menu >
Settings
>
Wireless
& networks
>
Wi-Fi settings
.
2.
Touch
Wi-Fi
to turn on and scan. If Wi-Fi
is already on, touch Menu >
Scan
.
Your phone lists the networks it finds
within range.
Tip:
To show your phone’s MAC address
or other Wi-Fi details, touch Menu >
Advanced
.
3.
Touch a network to connect. If
necessary, enter pass codes from the
network administrator and touch
Connect
.
When Wi-Fi power is on and your phone
finds a network you’ve used, it
automatically reconnects and shows in
the status bar.
To
turn off
Wi-Fi power: Touch Menu >
Settings
>
Wireless & networks
>
Wi-Fi
.
Wi-Fi hotspot
Your can make your phone a Wi-Fi hotspot
to provide portable, convenient internet
access to other Wi-Fi enabled devices.
Note:
Keep it secure. To protect your
phone and hotspot from unauthorized
access, it is strongly recommended that
you set up hotspot security (WPA2 is the
most secure), including password.
To Next Page
Loading...
