To Next PageTo Next PageWhy Motorola Cordless Telephone will not recognize SIM card?
If your Motorola Cordless Telephone will not recognize or accept SIM card, first check the SIM card contacts for dirt. Clean if necessary and check if the fault has been cleared. If the contacts are clean, insert a known good SIM card into the phone. If the issue persists, the transceiver board may be defective, requiring replacement.
What to do if I tried to place a call and heard an alternating high/low tone on my Motorola A925?
If you hear an alternating high/low tone when placing a call on your Motorola Cell Phone, your call did not reach the wireless system. You may have dialed the number too soon after turning the handset on. Wait until the Network indicator in the status bar shows you are connected to the network.
What does 'Data Calls Only' mean on my Motorola A925?
The 'Data Calls Only' message on your Motorola Cell Phone indicates you're in an area where the network does not support voice calls. You can only make data calls until you move to an area that supports voice calls.
Why are the audio, video, or image files on the memory card not appearing in the Music, Video, or Pictures application on my Motorola A925 Cell Phone?
The file must be stored in the proper directory to appear in the application.
What to do if I pressed the Power/End key on my Motorola A925 Cell Phone and nothing happened?
If pressing the Power/End key on your Motorola Cell Phone does not turn it on, press and hold the key until the display appears and you hear an alert. If nothing happens, ensure the battery is charged.
What to do if my Motorola A925 Cell Phone was stolen?
If your Motorola Cell Phone was stolen, report it to the police and your service provider (the company that sends your monthly wireless service bill).
Why is there no audio when using headset with Motorola Cordless Telephone?
If you experience no or weak audio when using a headset with your Motorola Cordless Telephone, first ensure the headset plug is fully seated in the jack. If the problem persists, the jack on the transceiver board might be faulty, requiring replacement of the transceiver board.
What to do if the incoming call alert is distorted on Motorola Cordless Telephone?
If the incoming call alert transducer audio on your Motorola Cordless Telephone is distorted or the volume is too low, the transceiver board may be faulty and needs to be replaced.
Why is the vibrator not working on my Motorola Cordless Telephone?
If the vibrator feature on your Motorola Cordless Telephone is not functioning, it could be due to a defective vibrator, which would need to be replaced. Alternatively, a defective transceiver board could be the cause and also would need to be replaced.
Why can't I make or answer calls on my Motorola A925 Cell Phone?
If you cannot make or answer calls on your Motorola Cell Phone, ensure you have a network signal. Also, avoid obstructions like bridges or tall buildings that may interfere with the signal. Check if the call barring feature is enabled on your handset, and ensure that your handset is not in Airplane mode.
General| Network | GSM / UMTS |
|---|---|
| 2G bands | GSM 900 / 1800 / 1900 |
| 3G bands | UMTS 2100 |
| GPRS | Class 10 |
| EDGE | No |
| SIM | Mini-SIM |
| Internal | 12 MB |
| Camera | VGA |
| Loudspeaker | Yes |
| 3.5mm jack | No |
| WLAN | No |
| GPS | No |
| Radio | No |
| USB | Yes |
| Messaging | SMS, MMS, Email |
| Browser | WAP 2.0/xHTML |
| Java | Yes, MIDP 2.0 |
| Dimensions | 148 x 60 x 24 mm |
| Type | TFT |
| Size | 2.9 inches |
| Resolution | 176 x 220 pixels |
| Platform | Symbian OS 7.0s |
| CPU | ARM 9 |
| Memory Card slot | MMC |
| Alert types | Vibration; Downloadable polyphonic ringtones |
| Bluetooth | v1.1 |
| Features | Organizer |
| Battery | Removable Li-Ion |
