78 - Customising Handset Settings
Choosing Vibrate Pattern
When you set the alert mode to vibrate, the handset vibrates to
indicate an incoming call or message. You can select from the
different vibrate patterns provided.
Note: See Alert Mode on page 29 for how to view and set the alert
mode.
Installing Ringtunes
If you want to use ringtunes not supplied with the handset, you can
install audio files as ringtunes. You can then assign the installed
ring tone to a call or message as described in “Choosing Ringtunes
for Calls” and “Choosing Ringtunes for Messages” earlier in this
section. You can also assign installed ringtunes as alarm sounds in
the Contacts, Calendar, To Do, and Time applications.
Sample ringtunes are provided on the CD-ROM supplied with the
handset.
Ringtune File Formats
You can install the following types of audio files as ringtunes: MIDI,
MP3, and WAV.
Do This
1 Open Control Panel application ( ).
2 Tap General tab.
3 Tap Ring Tone Manager.
4 Tap the Vibrate tab.
5 Tap the vibrate pattern you want to use.
6 Tap Done.
To Next Page
Loading...
