2 Apply the solution sparingly with a stiff, non-metallic,
short-bristled brush, making sure excess detergent
does not get entrapped near the connectors, controls
or crevices.
3 Dry the radio thoroughly with a soft, lint-free cloth.
Battery Care
This chapter provides information on the battery charge
status, battery recycling and disposal.
Battery Charge Status
Your radio can indicate the battery’s charge status through:
• the LED and sounds.
• the fuel gauge icon on the display.
You can also check the battery charge status using the
menu entry. See IMPRES Battery Annunciator for more
information.
LED and Sounds
When your battery is low:
• the LED blinks red when the PTT button is pressed.
• you hear a low-battery “chirp” (short, high-pitched tone).
Fuel Gauge Icons
A blinking fuel gauge icon ( ) is displayed only when the
battery voltage drops to low level. In this case, replace the
battery with a fully charged one.
Gauge Battery Charge
76% to 100% full
1
51% to 75%
1
26% to 50%
1
1
These are for IMPRES battery operation only.
English
16
To Next Page
Loading...
