Need help?Do you have a question about the Motorola BLE Series and is the answer not in the manual?
Outlines the structure and content of the manual for effective use.
Provides contact information and resources for obtaining technical assistance and support.
Details the procedure and requirements for returning units for repair service.
Explains product configuration options and details the configurator diagram.
Describes the product's aluminum housing, its dimensions, and protection features.
Describes the RF and weather gaskets essential for proper sealing and protection.
Details the location, function, and protection of the housing's coaxial and test ports.
Details power supply components, voltage settings, and surge protection options.
Explains the forward path signal flow, key components, and operational gain.
Describes the optional return path, its components, and functionality.
Describes the ingress control switch function for return path signal attenuation or cutoff.
Lists available optional modules and accessories for enhancing BLE*/* functionality.
Provides step-by-step instructions for performing forward path alignment procedures.
Guides the selection and installation of appropriate cable equalizers for frequency compensation.
Describes the use of cable simulators for specific system needs and compensation.
Explains the use of input and midstage pads for signal attenuation and gain adjustment.
Explains how to adjust flatness controls on the LDR board for optimal frequency response.
Describes the location, impedance, and use of directional coupler test points.
Describes the Bode board's function in compensating for temperature changes and its manual control.
Details automatic (ADU/TDU) and manual methods for controlling amplifier output levels.
Provides detailed steps for adjusting the manual gain control for optimal performance.
Describes the TDU function, setup procedure, and limitations for temperature compensation.
Describes the ADU function, setup procedure, and its precision in maintaining output levels.
Details ADU padding requirements for achieving correct input levels at various output ranges.
Introduces the procedures required for proper return path alignment.
Lists pre-alignment instructions and required equipment for return path setup.
Outlines the step-by-step procedures for aligning the unit's return path.
Covers powering options and standard/optional surge protection methods for the unit.
Outlines pre-testing instructions and precautions before performing bench alignment.
Lists the necessary test equipment and details how to connect it for bench testing.
Provides steps to measure the unit's full and operational forward gain.
Details measuring operational gain, flatness, and making necessary adjustments.
Details how to test the return path gain and frequency response for compliance.
Outlines the final steps after completing bench testing, including recording data.
Provides step-by-step instructions for installing the unit in an aerial configuration.
Provides step-by-step instructions for installing the unit in a pedestal configuration.
Offers guidance for using the amplifier effectively in systems with lower frequencies.
Provides tips for using the amplifier in systems with lower gain requirements.
Lists the detailed technical specifications for the BLE87S/H* model.
Lists the detailed technical specifications for the BLE87S/G* model.
Details the AC current requirements for various voltage inputs and configurations.
Lists specifications for the RA-Kit/L return amplifier and ADU automatic drive unit.
To Next Page
General
