Need help?Do you have a question about the Motorola BLE100 and is the answer not in the manual?
Describes the integrated DC power supply, its AC input capabilities, and voltage selection for the BLE100.
Details the necessary steps and considerations for aligning the forward signal path of the BLE100 for optimal performance.
Explains the selection and use of SFE-100-* equalizers to compensate for cable attenuation and achieve desired output tilt.
Discusses methods for controlling amplifier output levels, including automatic and manual gain control.
Provides step-by-step instructions for setting the manual gain control on the BLE100 for desired output levels.
Describes the operation and setup of ADU/QADU for automatic output level control, compensating for temperature changes.
Outlines the procedures and equipment required for aligning the BLE100's return signal path for upstream performance.
Provides a step-by-step guide for configuring and aligning the return amplifier and equalizer components.
Provides instructions for measuring the full gain, operational gain, and flatness of the BLE100 in the forward path.
Details the procedures for testing the return bandpass, gain, and frequency response of the BLE100.
Provides step-by-step instructions for mounting the BLE100 housing in an aerial configuration.
Offers detailed instructions for mounting the BLE100 housing in a pedestal configuration.
To Next Page
General
