3. Using Your Phone16
Incoming call waiting
*If another call comes in while you are on the phone, you can:
• Press and to reject the waiting call.
• Press and to end the active call and connect the waiting
call.
• Press and to hold the active call and connect to the
waiting call.
* Network and subscription dependent.
Holding a call
• When you are on a phone call and wish to dial another number, you
can place the current call on hold by pressing (
HOLD
). After a
call is put on hold, “ 1” will appear on the screen, and when the
second call is connected, “ 1” will pop up.
• When you have an active call and a call that is on hold, you can
press
SWAP
to switch calls.
• When an active call ends, the call on hold will resume. You can also
make a call on hold active again by pressing
RESUME
if you
have only a held call.
Muting the microphone
You can mute the microphone while on a call by pressing
(
MUTE
), so the person you are speaking with cannot hear your voice.
appears when the microphone is mute. To un-mute the
microphone, press (
MUTE
) again.
• This hold-call feature is network and subscription dependent.
• The figure next to / (in the example above it is "1")
indicates the number of held/active calls.
0
1
2
To Next Page
Loading...
