7. The Menus72
Phone Code (6-1-2)
Activate/Deactivate the phone code. The phone code helps
prevent unauthorized use of your phone. When this function is
on, you must enter your phone code every time you power on
your phone (there is no limitation on the number of wrong
attempts when you enter the phone code).
Select On or Off. When changing the phone code status, you
must enter your phone code. (The default phone code is 1234).
Change Code (6-2)
PIN Code (6-2-1)
You can change your PIN. You need to activate your PIN as
described in 6-1-1 before changing your PIN. First, enter the
original PIN and press (
OK
) or . Then enter the new PIN
and press (
OK
) or . Enter the new PIN again and press
(
OK
) or to confirm.
PIN2 Code (6-2-2)
You can change PIN 2 code the same way you change your PIN.*
* When you enter a wrong PIN2 code three times in a row, you need
to enter the PUK2 code to unblock PIN2, if so provided by your
operator.
Phone Code (6-2-3)
You can change your phone code in the same way you change
your PIN.
Network Code (6-2-4)
You can change the network password in the same way you
change your PIN.
To Next Page
Loading...
