7. The Menus76
SMS Alert (7-3)
Select an alert tone for incoming short messages. Your phone will
make the tone you set when a short message has been received.The
alert tone you set in this option will be used for the currently active
profile (see
Profiles
7-4).
Profiles (7-4)
This feature allows you to customize such audio settings as ring
tones, vibration, ring volume, etc. to suit a variety of occasions.
When you are in this menu, you will see a list of profiles. You can
customize the settings of each profile and activate one of these
profiles for a special event or situation.
General (7-4-1)
Activate (7-4-1-1)
Activates settings of the General profile.
Customize (7-4-1-2)
This menu allows you to customize the following as needed:
Vibracall
Sets the vibration mode:
Off: Turn the vibration mode off.
Vibrate and Ring: The handset rings and vibrates
simultaneously when a call comes in.
Vibrate Only: The handset vibrates without ringing
when a call comes in. appears at the top of the idle
screen when you select this mode.*
* However, will not appear if
Caller Group
feature is
on, unless you select
Vibrate Only
for all caller groups.
The settings you set in the
Caller Group
(1-6) have priority over
the following
Profile
settings (see page 42). Accordingly,
Vibracall
,
Ring Type
and
SMS Alert
you set here are applied only
when the
Caller Group
feature is deactivated.
To Next Page
Loading...
