4. Input Mode Menu22
Tips on using Smart Input (iTAP)
To enter words:
• Type a word by pressing a corresponding alphanumeric key only
once for each letter, without having to consider the order of the
alphabets indicated on the keys. The word you type will appear
outside the text frame before you confirm it OK.
• To switch between upper case and lower case, press . Press
(
DELETE
) once to delete a wrong letter; long press to
delete an entire word.
• The word changes as you type letters--disregard what's on the
screen until you type an entire word.
• If the word displayed is not the one you want after typing it
completely, press for the next word candidate. You can also
press for the next/previous candidate. When the desired one
appears, press (
OK
) or to put it inside the text frame,
then a space will appear automatically between the word and the
cursor. So you can type the next work directly without having to
leave a space for it.
• After you enter a word in the text area, you can press once to
move the cursor to the insertion point of the next/last character;
long press to move the cursor continuously.
• In the text area, press (
DELETE
) once to clear one character;
long press to clear all text.
0
To Next Page
Loading...
