10
Setting Up Your Phonebook
characters in the dialing sequence to ensure that the
number dials and connects properly:
Notes:
•
You can store a maximum of 40 digits per number for
a phonebook entry on your phone. The maximum
number may vary for entries stored on the SIM card.
Each character counts as one digit.
•
You cannot store numbers that contain a
w
or
n
character on the SIM card.
Recording a Voice Name For a
Phonebook Entry
A voice name lets you call the phonebook entry using
voice dial. You can record a voice name for a new or
existing phonebook entry.
Note:
You cannot record a voice name for an entry stored
on a SIM card.
Record your voice name in a quiet location. Hold the
phone about 4 inches (10 centimeters) from your mouth,
and speak directly into the phone’s microphone in a
normal tone.
Dialing a Phonebook Entry
Use one of the following procedures to call a number (or
send a text message to an email address) in your
phonebook.
Note:
You can also use speed dial or 1-touch dial. See
your User’s Guide.
Using the Phonebook List
Using Voice Dial
Say the prerecorded phonebook entry name.
Editing a Phonebook Entry
Edit the entry as described on page 9.
Tip:
Press
M
to open the Phonebook Menu to perform
various operations on the selected entry.
Press To
M
>
Insert Pause
inserts a
p
(pause) character
Your phone dials the
preceding digits, waits for the
call to connect, then sends
the remaining digit(s).
Note:
If your network does
not recognize the first pause
character, try two (
pp
).
M
>
Insert Wait
inserts a
w
(wait) character
Your phone dials the
preceding digits, waits for the
call to connect, then prompts
you for confirmation before it
sends the remaining digit(s).
M
>
Insert 'n'
inserts an
n
(number)
character
Your phone prompts you for a
number before dialing the
call. The number you enter is
inserted into the dialing
sequence in place of the
n
character.
Find the Feature
M
>
Phonebook
Press To
1
S
scroll to the entry
2
VIEW
(
+
) view entry details
3
EDIT
(
+
) edit the entry
4
S
scroll to
Voice Name
5
RECORD
(
+
) begin recording
6
RECORD
(
+
)
and release,
then say the
entry’s name
(within 2
seconds)
record the voice name
7
RECORD
(
+
)
and release,
then repeat the
name
confirm the voice name
8
Press
DONE
(
-
)
store the voice name
Find the Feature
M
>
Phonebook
Press To
1
keypad key
letters
jump to entries that begin
with that letter (optional)
2
S
scroll to the entry you want
3
N
call the entry
Find the Feature
M
>
Voice Dial
Find the Feature
M
>
Phonebook
Press To
1
S
scroll to the entry you want to
edit
2
VIEW
(
+
) display the entry’s detailed
view
3
EDIT
(
+
) edit the entry
Press To
To Next Page
Loading...
