Motorola C350 - Connecting Your Phone to an External Device

113
Getting More Out of Your Phone
For more information about Motorola Original data kits,
see the Motorola Web site at:
http://www.motorola.com/dataaccessories
Connecting Your Phone to an External Device
Connect your phone to an external device (such as a
computer or hand-held device) using a USB cable.
Note: Not all devices are compatible with USB cable
connections. Check your external device for
specifications.
Set Up a Cable Connection
Attach a Motorola Original USB cable to the phone and
external device as follows.
Note: Your phone requires a mini-USB connector. Check
your computer or hand-held device to determine the type
of cable you need.
Install the Software
Install the software from the CD-ROM that comes with
your Motorola Original data kit. See the data kit’s user
guide for more information.
Do This
1 Plug the end of the cable with the Motorola logo
into your phone’s accessory connector port.
Make sure that the logo and the phone are both
facing you.
2 Plug the other end—the USB connection—into
the USB port on the external device.
C350.RG.book Page 113 Thursday, February 6, 2003 2:12 PM