Caller ID and the Calls list 25
7.3 Set alarm
Each handset can have a different alarm setting.
1.
Press m, scroll d to
DATE-TIME
and press m.
2.
Scroll d to
ALARM SET
and press m.
3.
Press u or d to select
ON
or
OFF
and press m to
confirm.
4.
If you select
ON
, enter the time in 24 hour format (e.g.
07--30 for 7:30am) and press
m to confirm.
7.4 Switch off alarm ring
When the alarm sounds, press any button to switch it off.
NOTE
If you are using the handset to make a call when the alarm
ring is due, you will hear a beep in the earpiece.
8. Caller ID and the Calls list
IMPORTANT
To use Caller ID, you must first subscribe to the service from
your network provider. A subscription fee may be payable.
To ensure that the caller's name is displayed, make sure you
have stored the full telephone number, including the area
code in the phonebook.
If the caller’s number is stored in the phonebook, the name
assigned to it will be displayed.
If the call is a withheld call,
WITHHELD
will be displayed.
If the number is unavailable,
UNAVAILABLE
will be displayed.
If the call is from an international number,
INTERNATIONAL
will
be displayed.
If the call is from the operator,
OPERATOR
will be displayed.
If the call is from a payphone,
PAYPHONE
will be displayed.
If the call is from a ringback request,
RINGBACK
will be displayed.
8.1 Caller ID
If you have subscribed to a Caller ID Service, you will be able
to see your caller’s number on your handset (provided it is
not withheld) prior to answering the call. The display can
show the first 12 digits or characters of the phone numbers
and names.
To Next Page
Loading...
Need help?
General
