Motorola CD301 - Getting Started; Initial Setup and Date;Time Configuration

10 Getting started
Welcome screen
1. The Welcome screen will briefly appear, then a list of countries is displayed.
2. Scroll
u
or
d
to your country (operator) and press Select . The handset and base will
reset to load the correct settings. The standby screen is then displayed and your phone
is ready to use.
Date and time
If you have subscribed to a Caller ID Service, the date and time is set automatically for all
handsets when you receive your rst call.
If you do not have a Caller ID service, you can set the date and time manually.
1. Press Menu , scroll
d
to Clock & Alarm and press Select .
2. Date & Time is highlighted. Press Select .
3. Enter the date using the format DD/MM/YY e.g. 04/08/14 for 4 August 2014 and press
Save .
4. Enter the time (HH:MM) and press Save .
If the current time format setting is 12 hour, scroll
u
or
d
to select am or pm .
5. Press n to return to standby.
Your CD3 is now ready for use.