Motorola CDM1250 - Adding or Deleting Channels in a Scan List

31
English
SCAN
Adding or Deleting Channels in a Scan List
Note: The enhanced keypad microphone is
required to operate this feature.
To add or delete channels in a scan list:
1 Press the Menu/Enter button to enter Menu
Mode.
2
y or z until
3 Press the Menu/Enter
button to
select
4
y or z until
5 Press the Menu/Enter
button to
select
6
y or z until
or until
7 Press the Menu/Enter button to confirm your
selection.
Program Lists
Program Lists
Scan List
Scan List
Add Entry?
Delete Entry?
8
y or z until you see the channel you
want to add or delete.
Note: You cannot delete the last remaining
channel in a scan list.
9 Press the Menu/Enter button to confirm your
selection.
10 If you added a channel,
you will see
–or–
If you deleted a channel,
you will see
Press the Menu/Enter button to confirm the
deletion.
You will see
11
Press the Menu/Enter
button to
return to
or to return to
–or–
Hold down the Exit button to exit Menu Mode.
Entry Saved
Delete?
Entry Deleted
Add Entry?
Delete Entry?