Motorola CDM1250 - Page 38

36
English
PHONE
6 When you hear a dial tone, enter or select a
phone number:
y or z to select a number from the phone list;
–or–
when using the enhanced keypad microphone
only, enter the phone number using the keypad;
–or–
when using the enhanced keypad microphone
only,
a Press and release the preprogrammed
Speed Dial button (see page 7) to use the
Speed Dial feature.
b Press the key (1 to 8) corresponding to the
number you want to call,
–or-
press “0” if you want to call the last number
dialed.
Note: To redial the last number dialed (if not
using Speed Dial), do not choose a
number. Proceed to step 7.
Alternatively, if you entered your access
code using the keypad, press z once
to access the last number dialed; then
press and release the PTT.
7 To end a phone call, do one of the following:
If your radio has the deaccess code
preprogrammed, proceed to step 8.
–or–
Enter the deaccess code using the keypad.
8 Press the Phone button to exit Phone Mode.
–or–
Press the Exit button to exit Phone Mode
and return to
–or–
Hold down
the Exit button to exit Menu Mode.
Phone