31
English
GETTING STARTED
SELECTING A CONVENTIONAL
ZONE AND CHANNEL
Up to a total of 16 conventional channels, in
one or more conventional zones, can be
programmed into your radio.
To Select a Conventional Zone and Channel
DIRECT ZONE ACCESS
The Direct Zone Access feature offers an
alternative way of accessing a trunked or
conventional zone.
To Activate Direct Zone Access
DIRECT CHANNEL ACCESS
The direct channel access feature allows you
to directly access a specific trunked talkgroup
or conventional channel within the zone you
have currently selected. This feature can be
programmed on one of the radio
programmable buttons (P1, P2, P3 or P4) and/
or any DTMF microphone (RMN4026)
programmable buttons (A, B or C).
3 With the PTT button depressed, speak
clearly into the microphone
4 Release the PTT button to listen.
1 v or w to select the appropriate
conventional zone.
2 y or z until you see the desired
conventional channel on the display.
1 Press the preprogrammed Direct Zone
Access button (see page 26).
2 y or z until you see the desired
zone on the display.
3 u to confirm your selection.
04_GetStarted.fm Page 31 Monday, April 15, 2002 4:17 PM
To Next Page
Loading...
