2 Turn the audio accessory plug until the lock icon on the plug is facing the front of the radio and
the indicators are aligned.
Figure 3: Connecting Wired Audio Accessory
3 Turn the radio on.
4 Press either the Battery Status, Menu, or Volume Control button to check for audio through
the audio accessory.
Table 1: Top LED Configuration if Wired Audio Accessory is not Connected or Removed
User Mode LED Status Color
Turn on radio without an au-
dio accessory plugged in.
Solid Blue
Audio accessory removed
while radio is on.
Red/purple blinks until an
audio accessory is plugged
in
NOTICE:
Lower the radio volume before placing the audio accessory in or near your ear.
MN007419A01-AA
Chapter 2: Getting Started
14
To Next Page
Loading...
