Motorola CLP107e - Selecting Channels; Default Channel Settings for CPS

2.8
Selecting Channels
Procedure:
1 Press the Menu button.
You hear a voice prompt to change channel by pressing the (+) or (-) button.
2 Select the required channel.
The LED indicates the color of the new channel.
3 Press the PTT button to confirm or the channel is activated after three seconds hang time.
2.8.1
Default Channel Settings for CPS
The table describes the default channel settings for Customer Programming Software (CPS).
Table 3: Channel Settings for CPS
CLP107e Models
Channel LED Status Color
1 Red
2 Green
3 Yellow
4 Blue
5 Purple
MN007419A01-AA
Chapter 2: Getting Started
18