RADIO OVERVIEW
9
English
Selecting a Channel
For CLP multi-channel models only:
1. When powered ON, press the Menu button,
you can hear the voice prompt:
• [Colour] “Channel” – [Channel#] – “To change” –
“press +/-”
2. Select the channel you want. The LED reflects
the colour of the new channel. Press PTT button
to confirm or it is activated after 3-second hang
time.
Default Channel Settings for CPS
CLP0086BHLAA (wired) CLP0086BBLAA (Bluetooth)
Channel LED Status Colour Channel LED Status Colour
1 Red 1 Red
2 Green 2 Green
3 Yellow 3 Yellow
4 Blue 4 Blue
5 Purple 5 Purple
6 White 6 White
7 Aqua 7 Aqua
8 Orange 8 Orange
To Next Page
Loading...
