Series Programming Quick Reference
To enter programming mode, press and hold Push to Talk
and
for 3 seconds while turning the radio on. The radio
beeps and displays , the channel number blinks, and the
frequency (indicated by ) and code (indicated by )
display alternately.
Set the
Channel
Press
or
.
Set the
Frequency
Press
until
displays. Press
or
to change the frequency.
Set the
Interference
Eliminator
Code
Press
until
displays.Press
or
to change the code.
Set
Available
Channels
Press until displays.
Press
or
to select
number of available channels.
6864110w16r_EN-FR.book Page 101 Tuesday, June 23, 2020 3:30 PM
To Next Page
Loading...
Need help?
General
