Programming Mode
26
Entering Programming Mode
Press and hold
Push to Talk
and for 3 seconds while turning the radio on. The
radio beeps and displays , the channel number blinks, and the frequency
(indicated by ) and code (indicated by ) display alternately.
Note:
If you press and release the
Push to Talk
button when programming
CLS1413 models, you will return to the front of the Programming Mode
.
Selecting a Channel
1. In programming mode, press until the channel number blinks
and the frequency and code display alternately (this is the first
setting after you enter programming mode).
2. Press
or to select the channel.
3. Press and hold
Push to Talk
to exit programming mode, or
press to continue programming.
Configuring the operating frequency from a pre-programmed frequency list
1. In programming mode, press until displays and the
frequency number blinks.
2. Press or
to select the frequency.
3. Press and hold
Push to Talk
to exit programming mode, or
press to continue programming.
Note:
See page 37 for information on frequencies for communicating with other business radios. If
you are matching your Series radio to an existing Spirit GT radio, see page 41.
6864110w16r_EN-FR.book Page 26 Tuesday, June 23, 2020 3:30 PM
To Next Page
Loading...
Need help?
General
