Programming Mode
28
Programming Call Tones and VibraCall
®
Your radio can transmit call tones to other radios in your group so you can alert them
that you are about to talk. Your radio is programmed at the factory with call tones
turned off (set to ), but you can change this setting to choose a distinctive call tone.
The VibraCall
®
feature is an additional call tone option that makes the radio vibrate
briefly when it receives if you have not transmitted or received in the last 30 seconds.
Select call tone 4 to turn VibraCall
®
on. displays on the radio when VibraCall
®
is
on.
1. In programming mode, press until displays.
2. Press or to hear and select the call tone. Select call
tone 4 for VibraCall
®
.
3. Press and hold
Push to Talk
to exit programming mode, or
press to continue programming.
To transmit your call tone, press on the side of the radio.
6864110w16r_EN-FR.book Page 28 Tuesday, June 23, 2020 3:30 PM
To Next Page
Loading...
Need help?
General
