8
English
RADIO OVERVIEW
LED INDICATORS
Three LEDs show radio status as follows:
Priority
Channel
Radio landed on
the
priority channel.
Lone Worker Reminds lone
worker to respond.
Hardware
Error
Hardware error,
tone continues until
valid operation.
Channel
Free Beep
Indicates current
channel is free.
Incoming
Emergency
Alert
Indicates an
emergency
situation.
Keypad
Acknowledge
Confidence tone
when any key
pressed.
Ringtones English/French/
General
Incoming calls (high
tones), outgoing
calls (low tones).
Tone Signal Description
LED State Indication
Green Solid Successful power up.
Green Off After successful power
up.
Green Flashing Radio is scanning.
Red Solid Radio transmitting.
Red Flashing Channel busy - when
receiving.
Yellow Solid Radio in monitor mode or
selectively called.
Yellow Flashing Group call reminder -
after answer timer
expires.
Yellow Double
Flash
Individual call reminder -
after answer timer
expires.