What does RAM ERR mean on Motorola Two-Way Radio and how can I fix it?
A RAM ERR message on your Motorola Two-Way Radio indicates a RAM error. Retest the radio by turning it off and then on again. If the message reappears, replace the main board or send the radio to a depot.
What does ROM ERR mean on Motorola Two-Way Radio and how to fix it?
A ROM ERR message on your Motorola Two-Way Radio indicates a ROM error. Reprogram the FLASH memory and retest. If the message reoccurs, replace the main board or send the radio to a depot.
General| IP Rating | IP54 |
|---|---|
| Frequency Range | VHF: 136-174 MHz, UHF: 403-470 MHz |
| Channel Capacity | 16 |
| Signaling | DTMF, MDC1200 |
| Durability | MIL-STD 810 C/D/E/F/G |
| Operating Temperature | -30°C to +60°C |
Details the Push-to-talk (PTT), On-Off/Volume Knob, Channel Selector, LED Indicator, Microphone, and programmable side buttons.
Explains LED status indications for Radio Call, Scan, Call Alert, Selective Call, and Low Battery Level.
Describes using programmable buttons via short/long press or hold down for various radio functions.
Covers charging new or low-charge batteries, initial charging times, and desktop charger LED status.
Instructions for sending calls via PTT and responding to incoming calls, including volume adjustment.
How to initiate or terminate a scan operation using the Scan button or Auto Scan channels.
To Next Page