Motorola CP040

13
English
GETTING STARTED
VOX OPERATION
When hands-free operation is desired, your radio
can be activated by voice alone using the VOX
feature when you speak through an accessory that
is connected to your radio.
Connecting a VOX Headset
ENABLE/DISABLE HEADSET
SIDETONE
Your dealer can program your radio to hear your
voice through the headset during transmit.
VOX Headset
Non-VOX Headset with In-Line PTT
1 Turn off your radio.
2 Connect the VOX accessory to your radio and
turn the radio on.
3 To enable or disable VOX operation, press
the preprogrammed VOX button.
Note: Pressing PTT disables VOX.
–or–
Select a channel that has been programmed
for VOX by your dealer to enable VOX.
Note: You do not need to press a
preprogrammed VOX button.
Note: Pressing the PTT button disables
VOX.
4 Select a channel that has not been
preprogrammed for VOX by your dealer to
disable VOX.
1 Turn off your radio.
2 Connect the VOX accessory to your radio.
3 Turn the radio on. During transmit, the
sidetone will be enabled, if programmed in
the radio.
1 Turn off your radio.
2 Connect the non-VOX accessory to your
radio.
3 Press and hold the In-line PTT on your
headset.
4 Turn the radio on and release the PTT once
the radio has completed start-up.
5 To disable the headset sidetone, turn off your
radio and turn the radio on again.