18
English
SCAN
START AND STOP SCAN G
DELETE A NUISANCE CHANNEL/
TALKGROUP
A channel with unwanted activity is called a
Nuisance Channel. You can temporarily delete
a Nuisance Channel from the scan list.
To Remove a Nuisance Channel
To Restore the deleted channel(s)
Restart scan, or simply turn off your radio and
turn it on again.
1 Press the preprogrammed Scan button to
start scan.
Note: The G indicator blinks to indicate
that the radio is scanning. The LCD
Screen shows the Prime Channel
where the scan began.
2 Press the
!button to scan the channels in
incremental order, and the"button to scan in
the opposite order.
3 Press the preprogrmmed Scan button to stop
scanning.
1 While the radio is on the nuisance channel,
press the preprogrammed Nuisance
Channel Delete button until you hear a tone.
2 Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
Note: You cannot temporarily delete a
Prime or Priority channel from the
scan list. If attempted, a low-pitched
tone is heard, and no action is taken.
04_Scan.fm Page 18 Monday, August 22, 2005 1:49 PM
To Next Page
Loading...
