Motorola CP180

14
English
BASIC USER GUIDE
Making a Selective Call (CP160/CP180)
You can make a selective call to a particular radio,
known as an individual call, or a group of radios,
known as a group call.
You can make calls by using the Menu, the pre-
programmed Radio Call button or Entering a valid
DTMF digit (0-9) to move to that location in the pre-
programmed list using the DTMF keypad (CP180
only).
Receiving a Selective Call
When you receive a selective call, the LED indicator
flashes yellow (if programmed by your dealer) and
you will hear two high pitched tones.
On CP160 and CP180 radios the display shows
F
and the pre-programmed name or ID of the calling
radio.
To acknowledge the call, press an release the PTT
button.
Press and hold the PTT button to talk; release to
listen.
Cancelling a Call
At any time while setting up a call, it may be cancelled
by pressing the Monitor button.
The call timer can also cancel a call.
Ending a Call
A call should always be ended by pressing the
Monitor button.
CP140_160_180_BUG.fm Page 14 Wednesday, November 5, 2003 3:13 PM