Motorola CT320 - Getting started; Location; Connecting the handset and base

6 Getting started
1. Getting started
IMPORTANT
Do not place your CT320 in the bathroom or other humid areas.
Location
You need to place your CT320 base within 2 metres of the telephone wall socket so that
the cable will reach. The socket-outlet should be installed near the equipment and should
be easily accessible.
Connecting the handset and base
1. Plug one end of the handset curly cord into the socket on the side of the base and the
other end into the socket at the bottom of the handset.
2. Plug the line cord into the socket marked on the back of the base unit.