Clock & Alarm 23
5.2.5 Delete entire redial list
1.
Press e then press m.
2.
Scroll d to
DELETE ALL
and press m.
3.
Display shows
CONFIRM?
. Press m to confirm. Press
> to return to standby.
6. Clock & Alarm
If you subscribe to your network’s Caller Identification service,
the time on your D1000 may be set automatically each time
you receive a call, depending on your network provider.
You can also set or adjust the time using the Clock & Alarm
menu.
6.1 Set date and time
1.
Press m and scroll d to
CLOCK/ALARM
. Press m.
Display shows
DATE & TIME
, then press m.
2.
Enter the date using the format
DD/MM
e.g.
04/ 08
for 4th
August.
3.
Press m and enter the time using the 24 hour format
HH:MM
, e.g. 14:45 for 2:45pm.
4.
Press m to confirm.
5.
Press > to return to standby.
NOTE
The date and time is retained during a power failure or when
the batteries are discharged.
To Next Page
Loading...
Need help?
General
