32 Advanced settings
8.11 Default settings 8.12 Auto prefix
You can set the D1000 to detect a dialling number and
replace it with another number. The number to be detected
can be up to 5 digits long. It can be replaced with a number
up to 10 digits.
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
PREFIX
. Press m.
3.
DETECT DIGIT
is displayed. Press m.
4.
Enter the number you want to be detected and press
m.
5.
Scroll to
PREFIX NUM
. and press m.
6.
Enter the number you want it replaced with and press
m.
7.
Press > to return to standby.
8.13 Country
If you move to another country you can set your phone to be
compatible with the network settings of that country.
NOTE
If you make a mistake during welcome mode country
selection, you can also reset your country.
Depending on your country, this option may be displayed as
NOT AVAIL
or you country may not be displayed.
Handset name Handset
Key tone On
First ring On
Auto pick up On
Auto hang up On
Ringer melody Melody 1
Ringer volume High
Earpiece volume 3
Phonebook Unchanged
Call log Empty
Redial list Empty
Master PIN 0000
Keypad lock Off
Clock 00:00
Alarm Off
Dial mode Tone
To Next Page
Loading...
Need help?
General
