Motorola D401 - Clock and Alarm Functions; Date and Time Configuration

27Clock & alarm
7. Clock & alarm
If you have subscribed to Caller ID Service, the date and time will be set on all your
handsets whenever a call is received. You can also manually set the date and time on the
individual handsets.
7.1 Set the date
1. Press m, scroll d to DATE--TIME and press m. The display shows DATE SET .
2. Press
m.
3. Enter the date (e.g. 12--08 for 12th of August) and press
m to conrm.
7.2 Set the time
1. Press m, scroll d to DATE--TIME and press m.
2. Scroll
d to CLOCK SET and press m.
3. Enter the time in 24 hour format (e.g. 18--30 for 6:30pm) and press
m to conrm.
7.3 Set alarm
Each handset can have a dierent alarm setting.
1. Press
m, scroll d to DATE--TIME and press m.
2. Scroll
d to ALARM SET and press m.
3. Press
u or d to select ON or OFF and press m to conrm.
4. If you select
ON , enter the time in 24 hour format (e.g. 07--30 for 7:30am) and press
m to conrm.
7.4 Switch o alarm ring
When the alarm sounds, press any button to switch it o.
NOTE
If you are using the handset to make a call when the alarm ring is due, you will hear a
beep in the earpiece.