Connecting Your DCX Set-top B
High-Definition All-Digital Dual Tuner DVR Set-top DCX3520e-M • User Guide
13
365-095-22821-x.1
Connecting an A/V Receiver — Audio
Connecting an A/V Receiver — Audi o
There are several options available for audio connections to your A/V receiver:
• Digital audio (OPTICAL S/PDIF)
• Stereo audio (AUDIO L/R)
If your A/V receiver supports it, the optical (S/PDIF) digital audio outputs may be used in
place of the stereo audio outputs (audio L/R). These outputs offer a higher level of audio
quality, including support for Dolby Digital audio.
• Digital audio optical (S/PDIF)—Connect the optical cable to the digital audio
OPTICAL connector on the DCX set-top and the optical connector on the A/V
receiver.
• Stereo audio—Connect the stereo audio cable to the audio L/R connectors on the
DCX set-top and the audio L/R connectors on the A/V receiver.
For information on configuring your DCX set-top settings, see Configuring the User
Settings.
Figure 5: Connecting an A/V Receiver — Audio
Note: Only one audio connection needs to be made to an HDTV.
Note: Solid lines indicate optimum connections.
To Next Page
Loading...
