BASICS
BLUETOOTH
®
PAIR A BLUETOOTH DEVICE WITH YOUR
SMARTPHONE
To connect with a new Bluetooth headset or other
device, you need to pair with it. You only need to do
this once for each device—to connect again, just
turn on the device.
1
Make sure the Bluetooth device you are pairing
with is in discoverable mode.
Note:
Refer to the guide that came with the Bluetooth device for
details.
2
To turn on Bluetooth power, touch Menu
>
System settings
>
Bluetooth
, then touch the
Bluetooth
power switch to turn it and
scan.
3
Touch a device to connect.
4
If necessary, touch
OK
, or enter the device
passkey (like
0000
) to connect to the device.
When the device is connected, the Bluetooth
connected indicator appears in the status
bar.
Note:
Using a mobile device or accessory while driving may cause
distraction and may be illegal. Always obey the laws and drive safely.
ON
To Next Page
Loading...
