Need help?Do you have a question about the Motorola EM400 and is the answer not in the manual?
Explains LED states for power, transmit, receive, and status.
Visualizes the strength of the received radio signal.
Shows whether the radio is in Low or High power mode.
Describes the DTMF keypad and programmable buttons.
Explains tones for self-test, pass/fail, and key presses.
Lists features programmable via front and microphone buttons.
Explains short press, long press, and hold down actions.
Assigns P1/P2 buttons for menu navigation and exit.
Enables/disables silent or open squelch monitor.
Toggles between repeater and direct transmission.
Enables or disables VOX feature for hands-free operation.
Manages scan lists and nuisance channels.
Accesses menu to add, delete, or prioritize channels.
Toggles squelch level between tight and normal.
To Next Page
General