General Radio Operation
English
Selecting a Zone
A zone is a group of channels.
Note: Your radio must be preprogrammed to allow you to use
these features.
Procedure:
1 > or < to ZONE.
2 Press the Menu Select button directly below ZONE. The
display shows the current zone and channel.
3 > or < button until the desired zone is displayed.
4 Press H or the PTT button to confirm the selected zone
number.
5 Press the PTT button to begin transmitting on the displayed
zone channel.
Selecting a Radio Channel
A channel is a group of radio characteristics, such as transmit/
receive frequency pairs.
Use the following procedure to select a channel.
Procedure:
Rotate the Mode knob until the display shows the desired
channel.
OR
1 Press and hold > to scroll to CHAN and press the Menu
Select button directly below CHAN. The display shows the
current zone and channel.
2 Rotate the Mode knob to the desired channel.
3 Press H or the PTT button to confirm the channel.
Press the PTT button to transmit on the displayed zone
channel.
To Next Page
Loading...
