Procedure for resetting the Camera 39
ENGLISH
5. Procedure for resetting the Camera
Note: If your Camera is moved from one router (e.g. home) to another router
(e.g. office) or you have Camera setup issues, then the Camera has to be reset.
Please reset the Camera with the following procedure:
1. Slide the ON/OFF switch to ON.
2. Press and hold the PAIR button on the underside of the Camera for 5
seconds, until you hear "Ready to start pairing".
3. Release the PAIR button and wait for the Camera to complete the internal
reset procedure.
4. You can add your camera again by following the steps 3.2.4 for Android
device or 3.3.4 of iOS device.
To Next Page
Loading...
