GETTING STARTED
11
Getting Started
English
TURNING THE RADIO ON OR OFF
¥ Turn the On-Off/Volume Control knob
clockwise to turn on the radio. You will hear
the Self Test Pass Tone and see a green LED
if the radio powers up successfully. If the
radio fails its self test, you will hear the Self
Test Fail Tone.
¥ Turn the On-Off/Volume Control knob
counter-clockwise, until a click is heard, to
turn off the radio.
ADJUSTING THE RADIOÕS VOLUME
1. Press and hold the Volume Set key; you will
hear a continuous tone.
2. Turn the On-Off/Volume Control knob and
adjust the volume level.
3. Release the Volume Set key.
SELECTING A RADIO CHANNEL
Your radio offers sixteen (16) channels for easy
access to required conventional channels. Some
channels on your radio may not be programmed.
Check with your dealer for more information.
Turn the Channel Selector knob clockwise or
counter-clockwise until you reach the desired
channel.
SENDING A CALL
1. Use the Channel Selector knob to change to
the required channel.
2. Press the PTT, and speak clearly with your
mouth about 2.5 to 5 cm (one to two inches)
away from the microphone.
3. Release the PTT when you Þnish speaking.
ON OFF
To Next Page
Loading...
